Pipe-in-liner™ H series
The Pipe-In-Liner™ W Series is an innovative, cutting-edge solution for trenchless rehabilitation gas pipes
Performance
Rehabilitating hot water pipes
Nominal ID of host pipes: 50mm (2 inches) - 1400mm (55 inches)
Maximum length of each installation: Up to 4000m (13,000ft)
Maximum operating pressure: 1.0 - 4.0 Mpa (150psi-600psi)
Maximum bursting pressure: 3.0-12.0 Mpa (450psi-1800psi)
Installation mode: Pull in U-shape Liners
Raw Materials: High tenacity fabric reinforcement layer, heat resistant PUX cover, heat-resistant PUX tube
Abrasion resistance (DIN53516): 10.5 mm3
Temperature of media: -40°C to 95°C (-40°F to 203°F)
Wall thickness: 6mm-8mm (0.236-0.315 inch)
Trenchless solution type: Non-structural pipe rehabilitation Pulling speed: Up to 400m/h
Service life duration: 40 years